http://www.orion-xt10.com/blog/synscan-pro-goto-backlash-problem/ Jim Priors Astronomy blog about the Orion Skyquest XT10i Intelliscope Newtonian Reflector telescope Fri, 18 May 2012 10:38:16 +0000 http://wordpress.org/?v=2.6.1 http://www.orion-xt10.com/blog/synscan-pro-goto-backlash-problem/#comment-518 How to improve worm gear backlash on Celestron CG-5 Equatorial Mount | Jims Orion XT10 Astronomy Blog Wed, 04 Feb 2009 00:31:07 +0000 http://www.orion-xt10.com/blog/?p=215#comment-518 [...] problem with the Backlash setting in the SynScan Pro V3 Goto Upgrade hand controller (which was fairly easily fixed by a firmware update to correct the excess Backlash adjustment), my interest was piqued and I wanted to check at an early stage that my scope and mount were [...] [...] problem with the Backlash setting in the SynScan Pro V3 Goto Upgrade hand controller (which was fairly easily fixed by a firmware update to correct the excess Backlash adjustment), my interest was piqued and I wanted to check at an early stage that my scope and mount were [...]

]]> http://www.orion-xt10.com/blog/synscan-pro-goto-backlash-problem/#comment-509 More fun with the C6-SGT XLT SCT Telescope | Jims Orion XT10 Astronomy Blog Sun, 25 Jan 2009 00:23:09 +0000 http://www.orion-xt10.com/blog/?p=215#comment-509 [...] 3-star alignment was very easy and accurate now the backlash is fixed. Backlash needs tuning though. I thought with each star I aligned on, 1, 2, 3, it would [...] [...] 3-star alignment was very easy and accurate now the backlash is fixed. Backlash needs tuning though. I thought with each star I aligned on, 1, 2, 3, it would [...]

]]>